材料疲劳与断裂实验室_中国科学院金属研究所
联系我们  了解金属所
当前栏目:发表论文 回到首页
2011年发表论文
2016-09-27  |          【 】【打印】【关闭

论文题目 作者 期刊名称 出版社 卷页号 收录
类别
SCI
类别
影响
因子
通讯
作者
Fundamental factors on formation mechanism of dislocation arrangements in cyclically deformed fcc single crystals Li, P., Li, S. X., Wang, Z. G., and Zhang, Z. F. Prog. Mater. Sci.   56 (2011) 328-377 SCI 1 16.579 李鹏
In-situ observations on the creep-fatigue behaviors of Sn4Ag/Cu solder joints Zhang Q K, Zhang Z F Acta Mater.   59 (2011) 6017-6028 SCI 1   张哲峰
Effects of hysteresis loop shape on the low-cycle fatigue properties of AZ31 alloy along extruded and transverse directions Lv, F., Yang, F., Li, S. X., and Zhang, Z. F. Scripta Mater.   65 (2011) 53-56 SCI 2   张哲峰
Higher resistance of twin boundary to fatigue cracking than grain boundary in Cu bicrystals Li, L. L., Zhang, Z. J., Zhang, P., and Zhang, Z. F. Scripta Mater.   65 (2011) 505-508 SCI 2   张哲峰
Shear fracture behaviors and strength of intermetallics compounds Cu6Sn5 under indentation testing Zhang, Q. K., Tan, J., and Zhang, Z. F. J. Appl. Phys.   110 (2011) 014502 SCI 2   张哲峰
In-situ observations on shear and creep-fatigue fracture behaviors of SnBi/Cu solder joints Zhang, Q. K., and Zhang, Z. F. Mater. Sci. Eng., A   528 (2011) 2686-2693 SCI 2   张哲峰
Assessment of tearing resistance of ductile metals: using a new concept of tearing toughness Li, C. H., Duan, Q. Q., and Zhang, Z. F. Mater. Sci. Eng., A   528 (2011) 1636-1640 SCI 2   张哲峰
Enhanced very high cycle fatigue performance of extruded Mg-12Gd-3Y-0.5Zr magnesium alloy Yang, F., Lv, F., Yang, X. M., Yin, S. M., Li, S. X., Zhang, Z. F., and Wang, Q. D. Mater. Sci. Eng., A   528 (2011) 2231-2238 SCI 2   张哲峰
General relationship between strength and hardness of materials Zhang, P., Li, S. X., and Zhang, Z. F. Mater. Sci. Eng., A   529 (2011) 62-73 SCI 2   张哲峰
Fatigue properties of rolled AZ31 magnesium alloy along transverse and rolling directions Lv, F., Yang, F., Li, S. X., Wu, S. D., and Zhang, Z. F. Int. J. Fatigue   33 (2011) 672-682 SCI 2   张哲峰
Low-cycle fatigue cracking mechanisms of F.C.C. crystalline materials Zhang, P., Qu, S., Duan, Q. Q., Wu, S. D., Li, S. X., Wang, Z. G., and Zhang, Z. F. Philos. Mag.   91 (2011) 237-257 SCI     张哲峰
Transition of Bi embrittlement in SnBi/Cu joint couples with reflow temperature Zou, H. F., Zhang, Q. K., and Zhang, Z. F. J. Mater. Res.   26 (2011) 449-454 SCI     张哲峰
Interfacial microstructure and growth kinetic of intermetallic compounds layer at Sn-4wt%Ag/Cu-X (X=Zn, Ag, Sn) couples Zou, H. F., Zhang, Q. K., and Zhang, Z. F. J. Electron. Mater.   40 (2011) 1542-1548 SCI     张哲峰
Stress corrosion of a-brass tube: dezincing directly ascertained by SEM Qu, S., Yao, G., Tian, J. F., and Zhang, Z. F. Failure Analysis Journal   18 (2011) 2232-2239 SCI     张哲峰
Microstructural evolution and mechanical properties of a two-phase Cu-Ag alloy processed by high-pressure torsion at ultrahigh strains Tian, Y. Z., Wu, S. D., Zhang, Z. F., Figueiredo, R. B., Gao, N., Langdon, T. G. Acta Mater.   59 (2011) 2783-2796. SCI     张哲峰
Formation of fivefold deformation twins in an ultrafine-grained copper alloy processed by high-pressure torsion An, X. H., Lin, Q. Y., Wu, S. D., Zhang, Z. F., Figueiredo, R. B., Gao, N., and Langdon, T. G. Scripta Mater.   64 (2011) 249-252 SCI     张哲峰
Influences of stacking fault energy on the mechanical properties of nanostructured Cu and Cu-Al alloys processed by high-pressure torsion An, X. H., Lin, Q. Y., Wu, S. D., Zhang, Z. F., Figueiredo, R. B., Gao, N., Langdon, T. G. Scripta Mater.   64 (2011) 954-957 SCI     张哲峰
Strain hardening behavior of a two-phase Cu-Ag alloy processed by high-pressure torsion Tian, Y. Z., Wu, S. D., Zhang, Z. F., Figueiredo, R. B., Gao, N., Langdon, T. G. Scripta Mater.   65 (2011) 477-480 SCI     张哲峰
Influence of stacking fault energy on the microstructures and mechanical properties of nanostructure Cu-Al alloys during thermal annealing An, X. H., Qu, S., Wu, S. D., and Zhang, Z. F. J. Mater. Res.   26 (2011) 407-415 SCI     张哲峰
Microstructure and mechanical properties of Cu and Cu-Zn alloys subjected to equal channel angular pressing Zhang, Z. J., Duan, Q. Q., Yang, G., Wu, S. D., and Zhang, Z. F. Mater. Sci. Eng., A   528 (2011) 4259-4267 SCI     张哲峰
Comparison of microstructures and mechanical properties of a Cu-Ag alloy processed by different severe plastic deformation modes Tian, Y. Z., Jiang, C. B., Wu, S. D., Zhang, Z. F., Figueiredo, R. B., Gao, N., Langdon, T. G. Mater. Sci. Eng., A   528 (2011) 4331-4336 SCI     张哲峰
Enhancing the strength and ductility of Mg-12Gd-3Y-0.5Zr alloy by forming a bi-ultrafine microstructure Yang, H. J., An, X. H., Shao, X. H., Yang, X. M., Li, S. X., Wu, S. D., and Zhang, Z. F. Mater. Sci. Eng., A   528 (2011) 430-4311 SCI     张哲峰
The significance of stacking fault energy on microstructural evolution in Cu and Cu-Al alloys processed by high-pressure torsion An, X. H., Lin, Q. Y., Wu, S. D., Zhang, Z. F., Figueiredo, R. B., Gao, N., Langdon, T. G. Philos. Mag.   91 (2011) 3307-3326 SCI     张哲峰
Mechanical behaviors of ultrafine-grained 301 austenitic stainless steel produced by equal channel angular pressing Huang, C. X., Yang. G., Wang, C., Zhang, Z. F., and Wu, S. D. Metall. Mater. Trans., A   42 (2011) 2061-2071 SCI     张哲峰
Strength and toughness of Al-Cu alloys processed by equal channel angular pressing Fang, D. R., Tian, Y. Z., Duan, Q. Q., Wu, S. D., and Zhang, Z. F. J. Mater. Sci.   46 (2011) 5002-5008 SCI     张哲峰
Influence of stacking fault energy in the microstructures and grain refinement in the Cu-Al alloys during equal channel angular pressing An, X. H., Wu, S. D., and Zhang, Z. F. Mater. Sci. Forum   667-669 (2011) 379-383 SCI     张哲峰
Enhancing Strength and Maintaining Ductility of Mg-3%Li-1%Sc Alloy by Equal Channel Angular Pressing Yang, H. J., Shao, X. H., Li, S. X., Wu, S. D., and Zhang, Z. F. Mater. Sci. Forum   667-669 (2011) 839-844 SCI     张哲峰
Shear stability of metallic glass Wu, F. F., Zheng, W., Wu, S. D., Zhang, Z. F., and Shen, J. Int. J. Plasticity   27 (2011) 560-575 SCI     张哲峰
Intrinsic size effects in the mechanical response of taper-free nanopillars of metallic glass Chen, C. Q., Pei, Y. T., Alexii, O.,De Hosson, J. T. M., Zhang, Z. F., and Ma, E Phys. Rev. B   83 (2011) 180201 SCI     张哲峰
Tensile fracture criterion of metallic glass Qu, R. T., Eckert, J., and Zhang, Z. F. J. Appl. Phys.   109 (2011) 083544 SCI     张哲峰
Comparison of shear deformation stability on different metallic glasses induced by notches Zhao, J. X., and Zhang, Z. F. Mater. Sci. Eng., A   52 (2011) 2967-2978 SCI     张哲峰
Deformation, structural changes and damage evolution in nanotwinned copper under repeated frictional contact sliding A. Singh, M. Dao, L. Lu, S.Suresh  Acta Materialia Elsevier Science Ltd 59 (2011) 7311-7324 SCI 1 3.94 M. Dao
Tensile behavior of columnar-grained Cu with preferentially orientated nanoscale twins Z.S. You, L. Lu, K. Lu Acta Materialia Elsevier Science Ltd 59 (2011) 6927-6937 SCI 1 3.94 L. Lu
Fracture toughness and fatigue crack growth characteristics of nanotwinned copper A. Singh, L. Tang, M. Dao, L. Lu, S. Suresh Acta Materialia Elsevier Science Ltd 59 (2011) 2437-2446 SCI 1 3.94 L. Lu
Grain size dependence of tensile properties in ultrafine-grained Cu with nanoscale twins X.H. Chen, L. Lu, K. LU  Scripta Materialia Elsevier Science Ltd 64 (2011) 311-314 SCI 2 2.968 L. Lu
Microstructural Characterization and Hardness Behavior of a Biological Saxidomus purpuratus Shell W. Yang., G.P. Zhang, H.S. Liu, X.W. Li Journal of Materials Science & Technology   27(2011)139-146        
Structure and mechanical properties of Saxidomus purpuratus biological shells W. Yang, G. P. Zhang, X. F. Zhu, X. W. Li, M. A. Meyers Journal of the Mechanical Behavior of Biomedical Materials   4 (2011) 1514-1530 SCI     G.P.Zhang
Structural characterization and mechanical behavior of a bivalve shell (Saxidomus purpuratus) W. Yang, N. Kashani, X.W. Li, G.P. Zhang, M. A. Meyers Materials Science and Engineering C   31 (2011) 724-729 SCI      
Scaling of reliability of gold interconnect lines subjected to alternating current M. Wang, B. Zhang, G. P. Zhang, C. S. Liu Applied Physics Letters   99 (2011)011910-1-3 SCI     G.P.Zhang
Enhanced Plasticity of Cu-Based Laminated Composites Produced by Cold Roll-Bonding H. S. Liu, B. Zhang, G. P. Zhang Materials Science Forum   667-669 (2011) 1015-1020       G.P.Zhang
Delaying premature local necking of high-strength Cu: A potential way to enhance plasticity H. S. Liu, B. Zhang, G. P. Zhang Scripta Materialia   64 (2011) 13-16 SCI     G.P.Zhang
Microstructures and mechanical properties of Al/Mg alloy multilayered composites produced by accumulative roll bonding H. S. Liu, B. Zhang, G. P. Zhang Journal of Materials Science & Technology   27 (2011) 15-21 SCI     G.P.Zhang
Enhanced toughness and fatigue strength of cold roll bonded Cu/Cu laminated composites with mechanical contrast H. S. Liu, B. Zhang, G. P. Zhang Scripta Materialia   65 (2011) 891-894 SCI     G.P.Zhang
Size effects on tensile and fatigue behaviour of polycrystalline metal foils at the micrometer scale C. Y. Dai, G. P. Zhang, C. Yan Philosophical Magazine   91 (2011) 932-945 SCI     G.P.Zhang

材料疲劳与断裂实验室_中国科学院金属研究所

材料疲劳与断裂实验室

版权所有 中国科学院金属研究所 辽ICP备05005387号