* 为通讯作者

• L.M. Zhang, A.L. Ma, H.X. Hu, Y.G. Zheng,*, B.J. Yang, J.Q. Wang, Effect of microalloying of Ti or Cr on the corrosion behavior of Al-Ni-Y amorphous alloys, Corrosion, August 2017, DOI: 10.5006/2451.

• Qi-Ning Song, Nan Xu, Ye-Feng Bao, Yong-Feng Jiang, Wei Gu, Yu-Gui Zheng, Yan-Xin Qiao, Corrosion and Cavitation Erosion Behaviors of Two Marine Propeller Materials in Clean and Sulfide-Polluted 3.5% NaCl Solutions, Acta Metall. Sin. (Engl. Lett.), 30(2017), 712–720.

• H.X. Hu, Y.G. Zheng, The effect of sand particle concentrations on the vibratory cavitation erosion, Wear, 384–385 (2017) 95-105.

• Lei Qiao, Yuping Wu, Sheng Hong, Jianfeng Zhang, Wei Shi, Yugui Zheng, Relationships between spray parameters, microstructures and ultrasonic cavitation erosion behavior of HVOF sprayed Fe-based amorphous/nanocrystalline coatings, Ultrasonics Sonochemistry,· April 2017, DOI: 10.1016/j.ultsonch.2017.04.011.

• Okpo O. Ekerenam, Aili Ma, Yugui Zheng, and Wilfred Emori, Electrochemical Behavior of Three 90Cu-10Ni Tubes from Different Manufacturers After Immersion in 3.5% NaCl Solution, Journal of Materials Engineering and Performance, 26 (2017):1701–1716.

• Siyu He, Xiangyang Zhou, Zhibin Zheng, Yugui Zheng, Theoretical model and its verification for the effect of sand concentration on the critical flow velocity for erosion-corrosion of 304 stainless steel in 3.5 wt.% NaCl solution, Acta Metallurgica Sinica (English Letters), revised.

• W. Emori, S.L. Jiang, D.L. Duan, O.O. Ekerenam, Y.G. Zheng, P.C. Okafor, Y.X. Qiao, Corrosion behavior of carbon steel in amine-based CO2 capture system: effect of sodium sulfate 2 and sodium sulfite contaminants, Materials and Corrosion, accepted.

• W. Emori, S.L. Jiang, D.L. Duan, Y.G. Zheng, Effects of sodium thiosulfate and sodium sulfide on the corrosion behavior of carbon steel in an MDEA-based CO2 capture process, Journal of Materials Engineering and Performance, accepted.

• M.M. Liu, H.X. Hu, Y.G. Zheng, Effects of three sealing methods of aluminum phosphate sealant on corrosion resistance of the Fe-based amorphous coating, Surface & Coatings Technology, 309(2017) 579–589.

• Qiao Y. X., Cai. X., Ouyang. C., Zheng. Y. G., Effect of Hydrogen on Cavitation Erosion Behaviour of High Strength Steel, International Journal of Electrochemical Science, 11(2016): 10329-10346.

• Okafor P, Liu C, Zheng Y, Corrosion inhibition of pipeline steels in CO2-saturate system by an imidazoline based inhibitor, NACE - International Corrosion Conference Series, vol. 4 (2016).

• Q.N. Song, Y.F. Bao, Y.F. Jiang, Y.G. Zheng, D.R. Nic, Z.Y. Ma, Technical note: Corrosion and Cavitation Erosion Behaviors of the Thermo–mechanically Affected Zone (TMAZ) in a Friction Stir Processed Ni–Al Bronze, Corrosion, 72 (2016): 1438-1444.

• Z.B. Zheng, Y.G. Zheng*, Effects of surface treatments on the corrosion and erosion-corrosion of 304 stainless steel in 3.5% NaCl solution, Corrosion Science, 112(2016) 657-668.

• Junzhen Yi, Hongxiang Hu, Yaming Zhang, Yugui Zheng, Experimental and computational failure analyses of a high pressure regulating valve in a chemical plant, Engineering Failure Analysis, 70 (2016) 188–199.

• Z. B. Wang, H. X. Hu, Y. G. Zheng, Evaluation of the dissolved oxygen related electrochemical behavior of pure titanium in acidic fluoride-containing solutions, Journal of Solid State Electrochemistry, 20(2016) 3459-3471.

• G.Q. Liu, X.L. Zhang, D.R. Qu, Y.G. Zheng*, S.L. Jiang, X. Jiang, Q.X.Yang, F.L. Han, Naphthenic Acid Corrosion Characteristic and Corrosion Product Film Resistance of Carbon Steel and Cr5Mo Low Alloy Steel in Secondary Vacuum Gas Oil, Corrosion Engineering Science and Technology, 51 (2016): 445-454.

• Sheng Hong, Yuping Wu, Jianfeng Zhang, Yugui Zheng, Yuan Zheng, Jinran Lin, Synergistic effect of ultrasonic cavitation erosion and corrosion of WC-CoCr and FeCrSiBMn coatings prepared by HVOF spraying, Ultrasonics Sonochemistry, 31(2016)563-569.

• Z. B. Wang, Z. Y. Wang, H. X. Hu, C. B. Liu, Y. G. Zheng, Corrosion protection performance of nano SiO2/epoxy composite coatings in acidic desulfurized flue gas condensates, Journal of Materials Engineering and Performance, 25(2016) 3880-3889.

• Z. B. Wang, H. X. Hu, Y.G. Zheng*, W. Ke, Y.X. Qiao, Comparison of the corrosion behaviors of pure titanium and its alloys in fluoride-containing sulfuric acids, Corrosion Science, 103(2016) 50-65.

• Z.B. Zheng, Y.G. Zheng*, Erosion-enhanced corrosion of stainless steel and carbon steel measured electrochemically under liquid and slurry impingement, Corrosion Science, 102 (2016) 259–268.

• B. Jiang, S. L. Jiang, X. Liu, A. L. Ma, Y. G. Zheng*, Corrosion Inhibition Performance of Triazole Derivatives on Copper-Nickel Alloy in 3.5 wt.% NaCl Solution, Journal of Materials Engineering and Performance, 24 (2015) 4797-4808.

• H.X. Hu, Y.G. Zheng*, Y.M. Zhang, C. Niu, Failure analysis of a reboiler in the waste water stripping tower of a petrochemical plant, Journal of Failure Analysis and Prevention, 15 (2015):828–836.

• Y. Wang, Z.Z. Xing, Q. Luo, A. Rahman, J. Jiao, S.J. Qu, Y.G. Zheng, J. Shen, Corrosion and erosion–corrosion behaviour of activated combustion high-velocity air fuel sprayed Fe-based amorphous coatings in chloride-containing solutions, Corrosion Science, 98(2015) 339-353.

• Sheng Hong, Yuping Wu, Jianfeng Zhang, Yugui Zheng, Yujiao Qin, Jinran Lin, Effect of ultrasonic cavitation erosion on corrosion behavior of high-velocity oxygen-fuel (HVOF) sprayed near-nanostructured WC–10Co–4Cr coating, Ultrasonics Sonochemistry, 27(2015)374-378.

• H. Z. Hu, H. X. Hu, S .L. Jiang, Y. G. Zheng, Numerical Study of Flow past A Circular Cylinder Using SST κ-ω, LES and ELES Formulations, Progress in Computational Fluid Dynamics, 15(2015)203-213.

• Z.H. Ren, Y.G. Zheng*, C.H. Jiang, X.M. Cao, P. Jin, J.S. Zhang, Erosive behaviors of SiC foam/epoxy co-continuous phase composites, Wear, 336–337(2015)21-28.

• Z. B. Wang, H. X. Hu, Y. G. Zheng*, Determination and explanation of the pH-related critical fluoride concentration of pure titanium in acidic solutions using electrochemical methods, Electrochimica Acta, 170(2015)300-310.

• Z.B. Zheng, Y.G. Zheng*, W.H. Sun, J.Q. Wang, Effect of heat treatment on the structure, cavitation erosion and erosion-corrosion behavior of Fe-based amorphous coatings, Tribology International, 90（2015）393-403.

• Q.N. Song, Y.G. Zheng*, D.R. Ni, Z.Y. Ma, Characterization of the Corrosion Product Films Formed on the As-cast and Friction-stir Processed Ni–Al Bronze in a 3.5 wt.% NaCl Solution, Corrosion, 71 (2015) 606-614.

• X. Liu, Y. Lu, Y. S. Yang, H. X. Hu, and Y. G. Zheng*, Electrochemical behaviour of phenylalanine and its cobalt complex as corrosion inhibitors for mild steel in H2SO4, Russian Journal of Applied Chemistry, 2015, Vol. 88, No. 2, pp. 350−355.

• Xia Liu, Peter C. Okafor, Bin Jiang, Hongxiang Hu and Yugui Zheng*, The inhibitory effect of some bipyridine derivatives on the corrosion behaviour of N80 carbon steel in sulphuric acid solutions, Surface Review and Letters, Vol.22, No.1 (2015) 1550007 (11 pages), DOI: 10.1142/S0218625 X15500079.

• Xia Liu, Peter C. Okafor, Bin Jiang, Hongxiang Hu and Yugui Zheng*, Electrochemical Study on the Inhibition Effect of Phenanthroline and its Cobalt Complex as Corrosion Inhibitors for Mild Steel, Journal of Materials Engineering and Performance, 24 (2015):3599–3606.

• Sheng Hong, Yuping Wu, Jianfeng Zhang, Yugui Zheng, Yujiao Qin, Jinran Lin, Ultrasonic cavitation erosion of high-velocity oxygen-fuel (HVOF) sprayed near-nanostructured WC-10Co-4Cr coating in NaCl solution, Ultrasonics Sonochemistry, 26 (2015) 87–92.

• Zhengbing WANG, Hongxiang HU, Chunbo LIU, Huaining CHEN, Yugui ZHENG*, Corrosion behaviors of pure titanium and its weldment in simulated desulfurized flue gas condensates in thermal power plant chimney, Acta Metallurgica Sinica (English Letters), 28 (2015) 477-486.

• S. Hong, Y.P. Wu, J.F. Zhang, Y.G. Zheng, Y.J. Qin, W.W. Gao, G.Y. Li, Cavitation erosion behavior and mechanism of HVOF sprayed WC-10Co-4Cr coating in 3.5 wt% NaCl solution, Transactions of the Indian Institute of Metals, 68(2015): 151-159.

• Y. Wang, Y.G. Zheng, J.Q. Wang, M.L. Li, J. Shen, Passivation behavior of Fe-based amorphous metallic coating in NaCl and H2SO4 solutions, Acta Metallurgica Sinica, 51(2015): 49-56.

• Z.H. Ren, X.M. Cao, Y.G. Zheng*, J.S. Zhang, Mechanical properties and slurry erosion resistance of SiC ceramic foam/epoxy co-continuous phase composite, Composites Science and Technology, 107 (2015)129-136.

• Q.N. Song, Y.G. Zheng*, D.R. Ni, Z.Y. Ma, Studies of the nobility of phases using scanning Kelvin probe microscopy and its relationship to corrosion behaviour of Ni-Al bronze in chloride media, Corrosion Science, 92(2015) 95-103.

• A.L. Ma, S.L. Jiang, Y.G. Zheng*, W. Ke, Corrosion product film formed on the 90/10 copper-nickel tube in natural seawater: composition/structure and formation mechanism, Corrosion Science, 91(2015) 245-261.

• Z.B. Zheng, Y.G. Zheng*, X. Zhou, S.Y. He,W.H. Sun, J.Q. Wang, Determination of the critical flow velocities for erosion-corrosion of passive materials under impingement by NaCl solution containing sand, Corrosion Science,88 (2014)187-196.

• Sheng Hong, Yuping Wu, Yugui Zheng, Bo Wang, Wenwen Gao, Gaiye Li, Guobing Ying, Jinran Lin, Effect of Spray Parameters on the Corrosion Behavior of HVOF Sprayed WC-Co-Cr Coatings, Journal of Materials Engineering and Performance, 23(2014): 1434-1439.

• Z.B. Wang, H.X. Hu, C.B. Liu, Y.G. Zheng*, The effect of fluoride ions on the corrosion behavior of pure titanium in 0.05M sulfuric acid, Electrochimica Acta,135(2014) 526-535.

• Y. G. Zheng*, G. Q. Liu, Y. M. Zhang, H. X. Hu, Q. N. Song, Corrosion failure analysis of a condenser on the top of benzene-tower in styrene unit, Journal of Failure Analysis and Prevention, 14 (2014)286–295.

• A.L. Ma, S.L. Jiang, Y.G. Zheng*, Z.M.Yao, W. Ke, S.Xia，Correlation between microstructure and corrosion behavior of two 90-10 copper-nickel alloy tubes, Acta Metallurgica Sinica (English Letters), 27(2014), 730–738.

• Y. Wang, S.L.Jiang, Y.G. Zheng*, W. Ke, W.H. Sun, J.Q. Wang, Effect of molybdenum, manganese and tungsten contents on the corrosion behavior and hardness of iron-based metallic glasses, Materials and Corrosion, 65(2014) 733–741.

• Q.N. Song, Y.G. Zheng*, D.R. Ni, and Z.Y. Ma, Corrosion and Cavitation Erosion Behaviors of Friction Stir Processed Ni-Al bronze: Effect of Processing Parameters and Position in the Stirred Zone, Corrosion, 70(2014) 261-270.

• Z.B. Zheng, Y.G. Zheng*, W.H. Sun, J.Q. Wang, Effect of applied potentials on passivation and erosion-corrosion of a Fe-based amorphous metallic coating under slurry impingement, Corrosion Science, 82 (2014) 115–124.

• S. Hong, Y.P. Wu, B. Wang, Y.G. Zheng, W.W. Gao, G..Y. Li. High-velocity oxygen-fuel spray parameter optimization of nanostructured WC-10Co-4Cr coatings and sliding wear behavior of the optimized coating. Materials and Design, 55 (2014)286-291.

• B. Jiang, S.L.Jiang, A.L.Ma, Y.G. Zheng*, Erosion-corrosion behavior of electroless Ni-P coating on copper-nickel alloy in 3.5 wt.% sodium chloride solution, Journal of Materials Engineering and Performance, 23(2014)230-237.

• B. Jiang , S.L. Jiang, A.L. Ma , Y.G. Zheng, Effect of heat treatment on Erosion-corrosion behaviour of electroless Ni-P coatings in saline water, Materials and Manufacturing Processes, 29(2014)74–82.

• Wang W  Hu X  Zheng Y, Nano-reinforcing composite coatings fabricated by laser internal nitridation, Integrated Ferroelectrics, vol. 153, issue 1 (2014).

• H.X. Hu, C.B. Liu, H.Z. Hu, Y.G. Zheng, Three-dimensional numerical simulation of the flow around two cylinders at supercritical Reynolds number, Fluid Dynamics Research, 45(2013) 055504.

• S. Hong, Y.P. Wu, Y.G. Zheng, B. Wang, W.W. Gao, J.R. Lin. Microstructure and electrochemical properties of nanostructured WC-10Co-4Cr coating prepared by HVOF spraying. Surface & Coatings Technology, 235(2013)582-588.

• Y. G. Zheng*, H. Z. Hu, Y. M. Zhang, H. X Hu, Failure analysis of a melt urea pump impeller, Tribology - Materials, Surfaces and Interfaces, 7 (2013) 216-223.

• Q.N. Song, Y.G. Zheng*, S.L. Jiang, D.R. Ni, and Z.Y. Ma，Comparison of corrosion and cavitation erosion behaviors between the as-cast and friction-stir processed nickel aluminum bronze, Corrosion, 69(2013)1111-1121.

• Z.B. Zheng, Y.G. Zheng*, W.H. Sun, J.Q. Wang, Erosion-corrosion of HVOF-sprayed Fe-based amorphous metallic coating under impingement by a sand-containing NaCl solution, Corrosion Science, 76 (2013) 337–347.

• Y. Wang, S.L.Jiang, Y.G. Zheng*, W. Ke, W.H. Sun, W.L. Hou, X.C. Chang, J.Q. Wang, Effect of processing parameters on the microstructures and corrosion behavior of high-velocity oxy-fuel (HVOF) sprayed Fe-based amorphous metallic coatings, Materials and Corrosion, 64(2013)801-810.

• S.L. Jiang, Y.G. Zheng*, D.L. Duan, Failure analysis of weld joints between the elbow and the straight pipes of a vacuum evaporator outlet, Engineering Failure Analysis, 27 (2013) 203–212.

• Y. Wang, Y.G. Zheng*, W. Ke, W.H. Sun, J.Q. Wang, Corrosion of high-velocity oxy-fuel (HVOF) sprayed iron-based amorphous metallic coatings for marine pump in sodium chloride solutions, Materials and Corrosion, 63(2012)685-694.

• Y. Wang, S.L.Jiang, Y.G. Zheng*, W. Ke, W.H. Sun, J.Q. Wang, Electrochemical behaviour of Fe-based metallic glasses in acidic and neutral solutions, Corrosion Science, 63 (2012) 159–173.

• C.B. Liu, S.L. Jiang, Y.G. Zheng*, Experimental and computational failure analysis of a valve in a nuclear power plant, Engineering Failure Analysis, 22 (2012) 1–10.

• H.X. Hu, S.L. Jiang, Y.S. Tao, T.Y. Xiong,Y.G. Zheng, Cavitation erosion and jet impingement erosion mechanism of cold sprayed Ni-Al2O3 coating, Nuclear Engineering and Design, 241 (2011) 4929–4937.

• Y. Wang, S.L.Jiang, Y.G. Zheng*, W.H. Sun, J.Q. Wang, Effect of porosity sealing treatments on the corrosion resistance of high-velocity oxy-fuel (HVOF)-sprayed Fe-based amorphous metallic coatings, Surface & Coatings Technology, 206 (2011) 1307–1318.

• Y. Wang, Y.G. Zheng*, W. Ke, W.H. Sun, W.L. Hou, X.C. Chang, J.Q. Wang, Slurry erosion-corrosion behaviour of high-velocity oxy-fuel (HVOF) sprayed Fe-based amorphous metallic coatings for marine pump in sand-containing NaCl solutions, Corrosion Science, 53 (2011) 3177-3185.

• P. C. Okafor, C. B. Liu, Y.J.Zhu, Y. G. Zheng*, Corrosion and corrosion inhibition behaviour of N80 and P110 carbon steels in CO2-saturated simulated formation water by rosin amide imidazoline, Industrial Engineering Chemistry Research, 50 (2011)7273–7281.

• H.X. Hu, Y.G. Zheng*, C.B. Liu, Predicting the preferential sites to liquid droplet erosion of the bellows assemblies by CFD, Nuclear Engineering and Design, 241(2011)2295–2306.

• H.X. Hu, Y.G. Zheng*, Comparison of Inconel 625 and Inconel 600 in resistance to cavitation erosion and jet impingement erosion, Nuclear Engineering and Design, 240(2010)2721-2730.

• C.P. Qin, Y.G. Zheng*, R. Wei, Cavitation erosion behavior of nanocomposite Ti-Si-C-N & Ti/Ti-Si-C-N coatings deposited on 2Cr13 stainless steel using a plasma enhanced magnetron sputtering process, Surface and Coatings Technology, 204 (2010) 3530–3538.

• P. C. Okafor, C. B. Liu, X. Liu, Y. G. Zheng*, F. Wang, C.Y. Liu, F. Wang, Corrosion inhibition and adsorption behaviour of imidazoline salt on N80 carbon steel in CO2-saturated solutions and its synergism with thiourea, Journal of Solid State Electrochemistry, 14(2010)1367–1376.

• X.Q. Liu, Y.G. Zheng, X.C. Chang, W.L. Hou, J. Q. Wang．Influence of HVOF thermal spray process on the microstructures and properties of Fe-based amorphous / nano metallic coatings. Material Science Forum, 633-634 (2010) 685-694.

• D.R. Ni, B.L. Xiao, Z.Y. Ma, Y.X. Qiao, Y.G. Zheng, Corrosion properties of friction–stir processed cast NiAl bronze, Corrosion Science, 52(2010) 1610-1617.

• Hong Yu, Yugui Zheng*, Zhiming Yao, Cavitation erosion corrosion behavior of manganese-nickel-aluminum bronze in comparison with manganese-brass，Journal of Material Science and Technology, 25 (2009): 758-766.

• P. C. Okafor, C. B. Liu, X. Liu, Y. G. Zheng*, Inhibition of CO2 corrosion of N80 carbon steel by carboxylic quaternary imidazoline and halide ions additives, Journal of Applied Electrochemistry, 39(2009):2535–2543

• X.Q. Liu, Y.G. Zheng, X.C. Chang, W.L. Hou, J.Q. Wang, Z. Tang, A. Burgess，Microstructure and properties of Fe-based amorphous metallic coating produced by high velocity axial plasma spraying，Journal of Alloys and Compounds, 484 (2009) 300–307.

• X. Liu , Y.G. Zheng*, P. C. Okafor, Carbon dioxide corrosion inhibition of N80 carbon steel in single liquid phase and liquid/particle two-phase flow by hydroxyethyl imidazoline derivatives, Materials and Corrosion, 60(2009)507-513.

• Y. X. Qiao, Y. G. Zheng*, P. C. Okafor, W.Ke, Electrochemical behaviour of high nitrogen bearing stainless steel in acidic chloride solution: Effects of oxygen, acid concentration and surface roughness, Electrochimica Acta, 54 (2009) 2298-2304.

• Y. X. Qiao, Y. G. Zheng*, W.Ke, P.C.Okafor, Electrochemical behaviour of high nitrogen stainless steel in acidic solutions, Corrosion Science, 51 (2009) 979–986.

• Peter C. Okafor and Y.G. Zheng, Synergistic inhibition behaviour of methylbenzyl quaternary imidazoline derivative and iodide ions on mild steel in H2SO4 solutions, Corrosion Science, 51 (2009) 850–859.

• P. C. Okafor, X. Liu, Y. G. Zheng*, Corrosion inhibition of mild steel by ethylamino imidazoline derivative in CO2-saturated solution, Corrosion Science, 51 (2009) 761–768.

• X. Liu , P. C. Okafor,Y.G. Zheng*, The inhibition of CO2 corrosion of N80 steel in single liquid phase and liquid/particle two-phase flow by aminoethyl imidazoline derivatives, Corrosion Science, 51 (2009) 744–751.

• Y. G. Zheng*, S. Z. Luo, W. Ke, Cavitation erosion-corrosion behavior of CrMnB stainless overlay and 0Cr13Ni5Mo stainless steel in 0.5 M NaCl and 0.5 M HCl solutions, Tribology International, 41（2008）1181-1189.

• Wei-fu Wang, Mao-cai Wang, Feng-jiu Sun, Yu-gui Zheng, Jian-min Jiao，Microstructure and cavitation erosion characteristics of Al–Si alloy coating prepared by electrospark deposition，Surface & Coatings Technology, 202(21):5116-5121(2008).

• X. Liu , Y.G. Zheng*,The effect of hydrophilic group on the inhibition behavior of imidazoline for CO2 corrosion of N80 in 3%NaCl solution, Corrosion Engineering, Science & Technology，43(1): 87-92(2008).

• Y. G. Zheng*, H. Yu, S. L. Jiang, Z. M. Yao, Effect of the sea mud on erosion-corrosion behaviors of carbon steel and low  alloy steel in 2.4% NaCl solution, Wear, 264(11-12):1051-1058(2008).

• Y. X. Qiao, Y. G. Zheng*, X.Q. Wu, W. Ke, K. Yang, Z.H. Jiang, Cavitation erosion resistance of a high nitrogen stainless steel in comparison with a low N content CrMnN stainless steel,  Tribology - Materials, Surfaces and Interfaces，1(3):165-172(2007).

• Yugui Zheng*, Suzhen Luo, Wei Ke, Effect of passivity on electrochemical corrosion behavior of alloys during cavitation in aqueous solutions, Wear, 262(2007):1308-1314.

• Ding-Rong Qu, Yu-Gui Zheng*, Xiu Jiang, Wei Ke, Correlation between Corrosivity of Naphthenic Acids and Their Chemical Structures, Anti-Corrosion Methods and Materials, 54(4) (2007):211-218.

• D. R. Qu, Y. G. Zheng, H. M. Jing, Z.M.Yao, W. Ke, High temperature naphthenic acid corrosion and sulphidic corrosion of Q235 and 5Cr1/2Mo in synthetic refining media, Corrosion Science, 48（2006）1960-1985.

• Shengli Jiang, Yugui Zheng*, Zhiming Yao,Cavitation erosion behaviour of 20SiMn low alloy steel in Na2SO4 and NaHCO3 solutions, Corrosion Science, 48(2006)2614-2632.

• X. Jiang, Y.G. Zheng*, D.R.Qu, and W. Ke， Effect of calcium ions on pitting corrosion and inhibition performances for CO2 corrosion of N80 steel, Corrosion Science, 48(2006)3091-3108.

• Shengli Jiang, Yugui Zheng*, Suzhen Luo, Zhiming Yao, The influence of applied potential on cavitation erosion behavior of type 316L stainless steel in sulfuric acid solution, Corrosion, 62(2):99-108.

• X.Jiang, Y.G.Zheng*, W.Ke, Corrosion inhibitor performances for carbon dioxide corrosion of N80 steel under static and flowing conditions, Corrosion, 61(4):326-334.

• H. Yu, Y.G.Zheng*, Z.M.Yao, The cavitation erosion and erosion-corrosion behavior of carbon steel in simulating solutions of three rivers of China, Materials and Corrosion, 57(2006)705-714.

• D. R. Qu, Y. G. Zheng*, H. M. Jing, X. Jiang, W. Ke, Erosion-corrosion of Q235 and 5Cr1/2Mo steels in oil with naphthenic acid and/or sulphur compound at high temperature, Materials and Corrosion, 56(2005)533-541.

• X.Jiang, Y.G.Zheng*, W.Ke, Effect of flow velocity and entrained sand on inhibition performances of two inhibitors for CO2 corrosion of N80 steel in 3% NaCl solution, Corrosion Science, 47（2005）2636-2658.

• X. Q. Wu, H. M. Jing, Y. G. Zheng, Z. M. Yao, and W. Ke, Resistance of molybdenum-bearing stainless steels and molybdenum-bearing stainless steel coating to naphthenic acid corrosion and erosion-corrosion, Corrosion Science, 46:1013-1032(2004).

• X. Q. Wu, H. M. Jing, Y. G. Zheng, Z. M. Yao, and W. Ke, Erosion-corrosion of various oil-refining materials in naphthenic acid, Wear, 256(2004):133-144

• X. Q. Wu, H. M. Jing, Y. G. Zheng, Z. M. Yao, and W. Ke, Study on high-temperature naphthenic acid corrosion and erosion-corrosion of aluminized carbon steel, Journal of Materials Science, 39:975-985(2004).

• W.Liu, Y.G.Zheng*, C.S.Liu, Z.M.Yao, Cavitation erosion characteristics of a NiTi alloy, Metallurgical and Materials Transactions A, 35A(1): 356-362(2004).

• W.Liu, Y.G.Zheng*, C.S.Liu, Z.M.Yao, W.Ke, Cavitation erosion behavior of Cr-Mn-N Steels with comparison to 0Cr13Ni5Mo steel, Wear, 254:713-722(2003).

• Suzhen Luo, Yugui Zheng*, Jin Li, Wei Ke, Effect of curing degree and fillers on slurry erosion behavior of fusion-bonded epoxy powder coatings, Wear, 254:292-297(2003).

• Suzhen Luo，Yugui Zheng，Moucheng Li，Zhiming Yao，Wei Ke. Effect of cavitation on corrosion behavior of 20SiMn low alloy steel in 3%NaCl solution, Corrosion, 59(7):597-605(2003).

• J.H.Kim, I.S.Kim and Y.G.Zheng, Flow-accelerated corrosion behavior of SA106 Gr.C weldment, Materials and Corrosion, 54:23-31(2003).

• Suzhen Luo, Yugui Zheng*, Wei Liu, Hemin Jing, Zhiming Yao, Wei Ke, Cavitation erosion behavior of CrMnN duplex stainless steel in distilled water and 3% NaCl solution, Journal of Material Science and Technology, 19(4):346-350(2003).

• X. Q. Wu, H. M. Jing, Y. G. Zheng, Z.M.Yao, W. Ke, Corrosion and erosion-corrosion behaviors of carbon steel in naphthenic acid mediums, Materials and Corrosion, 53:833-844(2002).

• Yugui Zheng*, Wei Liu, Zhiming Yao, Wei Ke, Damage mechanism and metallic materials development in multiphase flow, Corrosion Science and Technology, 31(1):41-47(2002).

• X. Q. Wu, I. S. Kim, Y. G. Zheng, and W. Ke, Study on the naphthenic acid erosion-corrosion behaviors and prevention methods of carbon steel, Corrosion Science and Technology, 31(6):468-475(2002).

• Suzhen Luo, Yugui Zheng*, Jin Li, Wei Ke, Slurry erosion resistance of fusion-bonded epoxy powder coating, Wear, 249:733-738(2001).

• X. Q. Wu, H. M. Jing, Y. G. Zheng, W. Ke, Y. S. Yang, and Z. Q. Hu, Mechanical properties of the industrial HK40 reforming tubes produced by an improved centrifugal processing, Zeitschrift Für Metallkunde (Materials Research and Advanced Techniques), 92(2):179-183 (2001).

• X. Q. Wu, Y. G. Zheng, Z.M.Yao and W. Ke, Morphology and formation mechanism of the coke deposited on the inner wall of an industrial HP cracking tube, British Corrosion Journal, 36(2):121-126(2001).

• Yugui Zheng, Jun Hwan Kim and In Sup Kim, A study on flow-accelerated corrosion of SA106 Gr.C weldment, Journal of Korea Welding Society, 19(3):334-341(2001). In Korean.

• X. Q. Wu, H. M. Jing, Y. G. Zheng, Z. M. Yao, W. Ke, and Z. Q. Hu, The eutectic carbides and creep rupture strength of 25Cr20Ni heat-resistant steel tubes centrifugally cast with different solidification conditions, Materials Science and Engineering，A293(2000):252-260.

• Y.G. Zheng*, F. Yang, Z.M. Yao, W. Ke, On the critical flow velocity of Cu-Ni alloy BFe30-1-1 in flowing artificial seawater, Zeitschrift Für Metallkunde (Materials Research and Advanced Techniques), 91(4): 323-328(2000).

• Xuewen Cheng, Zheng Zhang, Yugui Zheng, Wei Ke, Zhiming Yao, Numerical simulation of erosion-corrosion in liquid-solid two-phase flow, Journal of Chinese Chemical Engineering, 8(4):347-355(2000).

• Yugui Zheng*, Zhiming Yao, Wei Ke, Erosion-corrosion resistant alloy development in aggressive slurry, Materials Letters, 46(2000):362-368.

• Yugui Zheng*, Zhiming Yao, Xiangyun Wei, Wei Ke, The synergistic effect between erosion and corrosion in acidic slurry medium, Wear, 186-187 (1995) 555-561.

• Zhiming Yao, Yugui Zheng, Wei Ke, The influence of applied potential on the erosion-corrosion behavior of AISI321 in acidic slurry medium, Wear, 186-187(1995) 568 -572.

• J. Li, Y.G.Zheng, J.Q.Wang, Z.M.Yao, Z.F.Wang, W.Ke, Depassivation and repassivation of AISI321 stainless steel surface during solid particle impact in 10% H2SO4 solution, Wear, 186-187(1995) 562-567.