材料疲劳与断裂实验室_中国科学院金属研究所
联系我们  了解金属所
当前栏目:发表论文 回到首页
2008年发表论文
2017-08-30  |          【 】【打印】【关闭

1) Zhang, Z. F., and Wang, Z. G., Grain boundary effects on cyclic deformation and fatigue damage, Prog. Mater. Sci., 53 (2008) 1025-1099.  [PDF]

2) Han, W. Z., Cheng, G. M., Li, S. X., Wu, S. D., and Zhang, Z. F., Deformation induced micro-twins and stacking faults in aluminum single crystal, Phys. Rev. Lett., 101 (2008) 115505.  [PDF]

3) Wu, F. F., Zhang, Z. F., Shen, J., and Mao, S. X., Shear deformation and plasticity of metallic glass under multiple loading, Acta Mater., 56 (2008) 894-904.  [PDF]

4) Li, P., Zhang, Z. F., Li, S. X., and Wang, Z. G., Effect of orientations on cyclic deformation behaviors of Ag and Cu single crystals: CSS curve and slip morphology, Acta Mater., 56 (2008) 2212-2222.  [PDF]

5) Zou, H. F., Yang, H. J., and Zhang, Z. F., Morphologies, orientation relationships and evolution of Cu6Sn5 grains formed between molten Sn and Cu single crystals, Acta Mater., 56 (2008) 2649-2662.  [PDF]

6) An, X. H., Han, W. Z., Huang, C. X., Zhang, P., Yang, G., Wu, S. D., and Zhang, Z. F., High strength and utilizable ductility of bulk ultrafine-grained Cu-Al alloys, Appl. Phys. Lett., 92 (2008) 201915.  [PDF]

7) Han, W. Z., Wu, S. D., Li, S. X., and Zhang, Z. F., Origin of deformation twinning from grain boundary in copper, Appl. Phys. Lett., 92 (2008) 221909.  [PDF]

8) Zhang, P., Duan, Q. Q., Li, S. X., and Zhang, Z. F., Cyclic deformation and fatigue cracking behavior of polycrystalline Cu, Cu-10%Zn and Cu-32%Zn alloys, Philos. Mag., 88 (2008) 2487-2503.  [PDF]

9) Han, W. Z., Zhang, Z. F., Wu, S. D., Li, S. X., Combined effects of crystallographic orientation, stacking fault energy and grain size on deformation twinning in FCC crystals, Philos. Mag., 88 (2008) 3011-3029.  [PDF]

10) Fan, J. T., Zhang, Z. F., and Shen, B. L., Plastic deformation of Co-based metallic glass composite with in-situ precipitating dendrite phases, Scripta Mater., 59 (2008) 603-606.  [PDF]

11) Li, P., Zhang, Z. F., Li, S. X., and Wang, Z. G., Similarity of dislocation patterns between fatigued Cu and Ag single crystals, Scripta Mater., 59 (2008) 730-733.  [PDF]

12) Qu, S., Zhang, P., Wu, S. D., Zang, Q. S., and Zhang, Z. F., Twin boundaries: Strong or weak? Scripta Mater., 59 (2008) 1131-1134.  [PDF]

13) Han, W. Z., Zhang, Z. F., Wu, S. D., and Li, S. X., Response to comments on “Influence of crystallographic orientations on deformation mechanism and grain refinement of Al single crystals subjected to one-pass equal channel angular pressing”, Scripta Mater., 59 (2008) 385-386.  [PDF]

14) Han, W. Z., Zhang, Z. F., Wu, S. D., and Li, S. X., Reply to comments on “Influence of crystallographic orientations on deformation mechanism and grain refinement of Al single crystals subjected to one-pass equal channel angular pressing”, Scripta Mater., 59 (2008) 421-423.  [PDF]

15) Kim, K. B., Das, J., Yi, S., Fleury, E., Zhang, Z. F., Wang, W. H., and Eckert, J., Propagation of shear bands in Cu47.5Zr47.5Al5 bulk metallic glasses, J. Mater. Res., 23 (2008) 6-12.  [PDF]

16) Yang, R. Q., Fan, J. T., Li, S. X., and Zhang, Z. F., Fracture behavior of Zr55Cu30Al10Ni5 bulk metallic glass under static and dynamic compression, J. Mater. Res., 23 (2008) 1744-1750.  [PDF]

17) Guo, H., Wen, J., Xiao, N. M., Zhang, Z. F., and Sui, M. L., The more shearing, the thicker shear band and heat-affected zone in bulk metallic glass, J. Mater. Res., 23 (2008) 2133-2138.  [PDF]

18) Wu, F. F., Shen, J., Mao, S. X., and Zhang, Z. F., Shear deformation stability of different metallic glasses, J. Mater. Res., 23 (2008) 2662-2667.  [PDF]

19) Zhu, Q. S., Zhang, Z. F., Wang, Z. G., and Shang, J. K., Inhibition of interfacial embrittlement at SnBi/copper single crystal by electroplated Ag film, J. Mater. Res., 23 (2008) 78-82.  [PDF]

20) Zou, H. F., and Zhang, Z. F., Ductile-to-brittle transition induced by strain rates in Cu/Sn-Ag-Cu solder joints, J. Mater. Res., 23 (2008) 1614-1617.  [PDF]

21) Zhang, H., Zhang, Z. F., Wang, Z. G., and Zhang, H. F., Deformation and damage evolution of tungsten fiber reinforced metallic glass composite induced by compression, Mater. Sci. Eng., A483-484 (2008) 164-167.  [PDF]

22) Fan, J. T., Zhang, Z. F., Jiang, F., and Sun, J., and Mao, S. X., Ductile to brittle transition of Cu47Zr46Al7 bulk metallic glass composites, Mater. Sci. Eng., A487 (2008) 144-151.  [PDF]

23) Huang, Y. J., Shen, J., Sun, J. F., and Zhang, Z. F., Enhanced strength and plasticity of a Ti-based metallic glass at cryogenic temperatures, Mater. Sci. Eng., A498 (2008) 203-207.  [PDF]

24) Qu, S., Huang, C. X., Gao, Y. L., Yang, G., Wu, S. D., Zang, Q. S., and Zhang, Z. F., Tensile and compressive properties of 304L stainless steel subjected to equal channel angular pressing, Mater. Sci. Eng., A475 (2008) 207-216.  [PDF]

25) Huang, C. X., Yang, G., Gao, Y. L., Wu, S. D., and Zhang, Z. F., Influence of processing temperature on the microstructures and tensile properties of 304L stainless steel by ECAP, Mater. Sci. Eng., A485 (2008) 643-650.  [PDF]

26) Wang, J. W., Duan, Q. Q., Huang, C. X., Wu, S. D., and Zhang, Z. F., Tensile and compressive behaviors of commercially pure Al subjected to equal channel angular pressing with different dies, Mater. Sci. Eng., A496 (2008) 409-416.  [PDF]

27) Han, W. Z., Zhang, Z. F., Wu, S. D., and Li, S. X., Investigation on the geometrical aspect during equal channel angular pressing by in-situ physical modeling experiments, Mater. Sci. Eng., A476 (2008) 224-229.  [PDF]

28) Yang, F., Yin, S. M., Li, S. X., and Zhang, Z. F., Crack initiation mechanism for extruded AZ31 magnesium alloy in the very high cycle fatigue regime, Mater. Sci. Eng., A491 (2008) 131-136.  [PDF]

29) Liu, J. H., Huang, C. X., Wu, S. D., and Zhang, Z. F., Tensile deformation and fracture behaviors of high purity polycrystalline zinc, Mater. Sci. Eng., A490 (2008) 117-125.  [PDF]

30) Wu, F. F., Zhang, Z. F., Shen, B. L., Mao, S. X. and Eckert, J., Size effect on shear fracture and fragmentati-on of a Fe57.6Co14.4B19.2Si4.8Nb4 bulk metallic glass, Adv. Eng. Mater., 10 (2008) 727-730.  [PDF]

31) Fan, J. T., Zhang, Z. F., Mao, S. X., and Eckert, J., Propagation and deflection of shear bands in metallic glass under circumferential constraint, Adv. Eng. Mater., 10 (2008) 1117-1121.  [PDF]

32) Zhang, L. C., Jiang, F., Zhang, D. H., He, L., Sun, J., Fan, J. T., and Zhang, Z. F., The mechanical properties of Cu-Zr based BMG and its composites under compression and bending, Adv. Eng. Mater., 10 (2008) 943-950.  [PDF]

33) Huang, C. X., Wu, S. D., Li, S. X., and Zhang, Z. F., Strain hardening behavior of ultrafine-grained Cu by analyzing their tensile stress-strain curves, Adv. Eng. Mater., 10 (2008) 434-438.  [PDF]

34) Han, W. Z., Zhang, Z. F., Wu, S. D., Huang, C. X., and Li, S. X., Orientation design for enhancing deformation twinning in copper single crystal subjected to equal channel angular pressing, Adv. Eng. Mater., 10 (2008) 1110-1113.  [PDF]

35) Yang, H. J., Yin, S. M., Liu, Y. D., Huang, C. X., Wu, S. D., Zhang, Z. F., and Li, S. X., Influence of deformation twins on grain size and texture evolution of AZ31 Mg alloy during compression, Adv. Eng. Mater., 10 (2008) 955-960.  [PDF]

36) Zou, H. F., and Zhang, Z. F., Effect of Zn addition on the interfacial reactions between Sn-Ag solder and Ag substrate, J. Electron Mater., 37 (2008) 1119-1129.  [PDF]

37) Fan, J. T., Zhang, Z. F., Shen, B. L., Mao, S. X., and Inoue, A., Nanocrystallization induced by quasi-static fracture of metallic glasses at room temperature, Philos. Mag. Lett.,88 (2008) 837-843.  [PDF]

38) Zou, H. F., Zhu, Q. S., and Zhang, Z. F., Growth kinetics of intermetallic compounds and tensile properties of silver single crystal/Sn-Ag-Cu joint, J. Alloys Compds., 461 (2008) 410-417.  [PDF]

39) Das, J., Kim, K. B., Zhang, Z. F., He, G., Muller, C., and Eckert, J., Deformation and fracture of Ti-based nanostructured composites, Int. J. Mater. Res., 99 (2008) 985-990.

40) Huang, C. X., Yang, H. J., Wu, S. D., and Zhang, Z. F., Microstructural characterizations of Cu processed by ECAP from 4 to 24 passes, Mater. Sci. Forum, 584-596 (2008) 333-337.  [PDF]

41) 张哲峰、伍复发、范吉堂、张 辉:非晶合金材料的变形与断裂,(邀请综述), 中国科学, 38 (2008) 349-372.  [PDF]

材料疲劳与断裂实验室_中国科学院金属研究所

材料疲劳与断裂实验室

版权所有 中国科学院金属研究所 辽ICP备05005387号