李薰讲座系列
·李薰成就奖
·李薰讲座奖
·李薰研究奖
·李薰青年学者奖
您现在的位置:首页 > 国际交流 > 李薰讲座系列 > 李薰讲座奖
李薰讲座奖获奖情况
 
2021-04-27 | 文章来源:李薰奖办公室        【 】【打印】【关闭


颁奖时间

获奖人及获奖详情

2019.9

Prof. Georg Kresse
Faculty of Physics and Centre for computational materials sciences,University of Vienna,1090 Vienna,Austria
Topic: Ab initio quo vadis: first principles calculations now and in the future

详情

2019.9

Prof. Ekkes Brück
Delft University of Technology,the Netherlands.
Topic: Generating Electricity from Waste Heat using Magneto-structural Materials

详情

2019.6

Prof. Sudipta Seal
University of Central Florida,USA
Topic: Nanoceria with engineered defects: Antioxidative Mimetic Enzymes

详情

2019.5

Prof. Kazunari. Domen
Shinshu University,Nagano;The University of Tokyo,Tokyo,Japan
Topic:PHOTOCATALYTICWATERSPLITTING FOR LARGE SCALE SOLARHYDROGENPRODUCTION

详情

2019.5

Prof. Helmut Clemens
Department of Materials Science,Chair of Physical Metallurgy and Metallic Materials,
Montanuniversitaet Leoben,A-8700 Leoben,Austria
Topic: Advanced Engineering Intermetallic Titanium Aluminides

详情

2019.4

Prof. H. K. D. H. Bhadeshia
University of Cambridge,Materials Science and Metallurgy,U.K.
Topic: Atomic mechanism of the bainite transformation

详情

2018.10

Prof. Guenter Schmitt
Topic: Corrosion Inhibitors and Flow Induced Localized Corrosion – Achievements and Challenges

详情

2018.10

Prof. K. Jane Grande-Allen
Department of Biomedical Engineering,Rice University,USA
Topic:Mechanobiology of Heart Valve Disease

详情

2018.10

Prof. Xun-Li Wang
Department of Physics,City University of Hong Kong
Topic:Microscopic Insights of Mechanical Behaviours from Neutron Diffraction Measurements

详情

2018.8

Prof. Cato T. Laurencin
University Professor,University of Connecticut
Topic:Regenerative Engineering: Opportunities in a New Convergence Field

详情

2018.7

Prof. Andrea Carlo Ferrari
Cambridge Graphene Centre,Engineering Department,University of Cambridge
Topic: The Roadmap to Applications of Graphene,Layered Materials and Hybrid Systems

详情

2018.7

Prof. Zi Qiang Qiu
Dept. of Physics,Univ. of California at Berkeley
Topic: Topology in magnetic systems

详情

2018.6

Devesh Misra
Department of Metallurgical,Materials and Biomedical Engineering
University of Texas at El Paso,USA
Topic: The Intersection of Materials Science and Biology: The Biomaterials Science

详情

2018.4

Prof. Nam-Gyu Park
School of Chemical Engineering,Sungkyunkwan University (SKKU),Suwon 440-746,Korea
Topic:Organic-inorganic Lead Halide Perovskite: Photovoltaics and Beyond

详情

2018.4

Prof. Nobuhiro Tsuji
Department of Materials Science and Engineering,Kyoto University
Yoshida Honmachi,Sakyo-ku,Kyoto,612-8492,Japan
Elements Strategy Initiative for Structural Materials (ESISM),Kyoto University
Topic:Bulk Nanostructured Metals processing,structure evolution,and mechanical properties

详情

2018.4

Prof. F. Rosei
Institut National de la Recherche Scientifique,Varennes (QC),Canada
Topic:Multifunctional materials for emerging technologies

详情

2018.4

Prof. Dr.-Ing. Uwe Glatzel
Metals and Alloys,University Bayreuth,Germany
Topic: Stress Contributions in Nickel-Base Superalloys

详情

2017.12

Prof.Jan Schroers
Yale University,USA
Topic: 2017 Bulk Metallic Glasses

详情

2017.11

Dr. Alan Turnbull OBE FRS FREng
National Physical Laboratory,UK
Topic:Characterising the early stages of crack development in environmentally assisted cracking

详情

2017.9

Prof. Knut W. Urban
Ernst Ruska Center for Microscopy and Spectroscopy with Electrons,
Research Center Juelich and RWTH Aachen University
Topic: Aberration-Corrected Electron Microscopy
How the overcoming of a basic law of nature allowed to see atoms in materials

详情

2017.7

Prof. Pulickel M. Ajayan
Department of Materials Science and NanoEngineering
Rice University,Houston,Texas,USA
Topic:Science and Engineering of Low Dimensional Materials

详情

2017.5

Prof. Irene J. Beyerlein
UC Santa Barbara
Topic:Deformation twinning at the intermediate scale 

详情

2017.5

Prof. Upadrasta Ramamurty
Department of Materials Engineering,Indian Institute of Science
Topic:Fracture in amorphous alloys

详情

2017.4

Prof. Harald Rose
Ulm University,Germany
Topic:From Micrometer to Sub-Angstroem Resolution – the Development of the Electron Microscope

详情

2017.3

David Shoesmith
Surface Science Western and the Department of Chemistry
Western University,London,Ontario,N6A 5B7,Canada
Topic:A MODEL FOR THECORROSION OF SPENTNUCLEARFUEL,AND THERELEASEOFRADIONUCLIDES,INSIDE A FAILED WASTECONTAINER

详情

2016.11

Prof. Damion Feron
CEA-Saclay,Bat 458,PC50,Gif-Sur-Yvette,France
Topic:Nuclear corrosion and materials: achievements and challenges

详情

2016.10

Prof. Patrice Simon
a Université Paul Sabatier Toulouse III,CIRIMATUMR CNRS 5085,
118 route de Narbonne,31062 Toulouse Cedex
b Réseau sur le Stockage Electrochimie de l’Energie,FR CNRS 3459,Amiens - France
Topic: Recent advances in Double Layer Capacitors

详情

2016.10

Prof. Arumugam Manthiram
The University of Texas at Austin,Austin
Topic:Next-generation Battery Technologies

详情

2016.10

Prof. Flemming Besenbacher
Aarhus University,Aarhus,Denmark
Topic: Catalytic model systems studied by high-resolution,video-rate Scanning Tunneling Microscopy 

详情

2016.10

Prof. Pavol Sajgalik
Slovak Academy of Sciences
Topic: GB chemistry of silicon nitride based ceramics – implications to the ceramics properties

详情

2016.10

Prof. Michael Schuetze
DECHEMA-Forschungsinstitut,Germany
Topic: Corrosion Protection of High Temperature Light Weight Materials

详情

2016.9

Prof. Zi-Kui Liu
Topic: Computational Thermodynamics,Materials Genome and Materials Design

详情

2016.9

Professor Diego Mantovani
Laboratory for Biomaterials and Bioengineering
Canada Research Chair I in Biomaterials and Bioengineering for the Innovation in Surgery
Dept Min-Met-Materials Engineering & Regenerative Medicine,CHU Québec Research Center,
Laval University,Québec City,Canada
Topic: NanoMaterials and NanoTechnology for Innovative Biomaterials and Health Applications

详情

2016.8

Prof. Dr. Sanjay Mathur
Institute of Inorganic Chemistry,University of Cologne,Germany
Topic:Chemical Nanotechnologies: From Molecules to Functional Nanostructures for Energy and Health Applications

详情

2016.6

Prof. Horia Metiu
Department of Chemistry & Biochemistry University of California,USA
Topic:Alkane activation by modified oxide catalysts

详情

2016.4

Prof. Stefan Blügel
Peter Grünberg Institut and Institute for Advanced Simulation,
Forschungszentrum Jülich and JARA,52425
Jülich,Germany
Topic:Computing Solids: past,present,future

详情

2015.12

Prof. Long-Qing Chen
Department of Materials Science and Engineering and Materials Research Institute,Penn State University,USA
Topic:Phase-field Method and Its Applications to Modeling and Predicting Microstructures and Properties

详情

2015.11

Prof. Yury Gogotsi
Department of Materials Science and Engineering,and A. J. Drexel Nanomaterials Institute,Drexel University,USA
Topic:MXenes: Expanding the World of Two-Dimensional Materials

详情

2015.11

Prof.  Katsuaki Suganuma
Institute of Scientific and Industrial Research,Osaka University,Japan
Topic:Interconnect materials development for advanced electronics packaging,Lead-free soldering,nanomaterials for printed electronics,and advanced power electronics packaging

详情

2015.10

Prof.  MAIRE Eric
Directeur de recherches (Research director) CNRS,France
Topic:Effect of pores in materials analyzed by X-ray tomography

详情

2015.10

Prof.  Alexander Michaelis
Fraunhofer Institute of Ceramic Technologies and Systems,IKTS,Dresden,Germany
Topic: Advanced Ceramics for Energy Systems and Environmental Technology

详情

2015.6

Prof. Thaddeus B. Massalski
Carnegie Mellon University,Pittsburgh,PA,USA
Foreign Member,German Academy of Science
Foreign Member,Polish Academy of Science
Editor,Progress in Materials Science
Editor,Metallurgical Transactions
Editor-in-Chief,
Binary Phase Diagrams
Co-author,
Structure of Metals
Topic: Phase Diagrams: Yesterday,today and tomorrow
Thermodynamics,Compilations,Low Temperatures,Errors,Modeling and Opportunities

详情

2015.6

Prof. William J. Weber
Department of Materials Science & Engineering,University of Tennessee,USA
Topic:On the Role of Electronic Energy Loss on Radiation Damage in Materials

详情

2015.5

Prof. Dorel Banabic
Technical University of Cluj Napoca,Romania
Topic: Advances in constitutive modelling and formability of sheet metals

详情

2015.4

Prof. Shigenobu Ogata
Department of Mechanical Science and Bioengineering,Osaka University,Japan
Center for Elements Strategy Initiative for Structure Materials (ESISM),Kyoto University,Japan
Topic: Atomistic understanding and prediction of mechanical properties of structural metallic materials

详情

2015.4

Prof. Martin Stratmann
President of the Max Planck Society
Topic: Coatings for corrosion protection: From the basics to new challenges

详情

2015.4

Prof. R. M. Latanision
Director (Emeritus),The H.H. Uhlig Corrosion Laboratory,MIT,and
Senior Fellow,Exponent,Inc.

Topic:Corrosion Science,Corrosion Engineering and New Technologies

详情

2014.10

Prof. Dr.-Ing. Gerhard Hirt
Institute of Metal Forming (IBF), RWTH Aachen University, Germany
Topic:Process and Materials Modelling in Incremental Forging and Ring Rolling

详情

2014.9

Prof. Gabriele CENTI
University of Messina,ERIC aisbl and CASPE-INSTM,Italy
Topic: Nano-engineering of materials and devices to producesolar fuels and to move towards the realization of artificial leaves

详情

2014.9

Prof. Hideo Nakajima
The Wakasa Wan Energy Research Center,Emeritus Professor of Osaka University,Japan
Topic: Fabrication,Properties and Applications of Porous Metals with Directional Pores

详情

2014.7

Prof. Bill Lee
Dept. of Materials and Centre for Advanced Structural Ceramics (CASC), Imperial College London
Topic:Structural Ceramics for Extreme Environments

详情

2014.6

Prof. Tadao Watanabe
Formerly Professor,Laboratory of Materials Design and Interface Engineering,Dept.of Nanomechanics,Graduate School of Eng.,Tohoku University. Sendai,Japan
Currently Honored Gust Scientist,Key Laboratory of Anisotropy and Texture of Materials,Northeastern University,Shenyang,China.
Topic: Historical Perspective of Grain Boundary Research andChallenges toward Grain Boundary Engineering in the 21stCentury

详情

2014.5

Prof. Mauricio Terrones
Department of Physics,Department of Chemistry,
Department of Materials Science and Engineering and Center for 2D Layered Materials. 
The Pennsylvania State University,USA. & Shinshu University,Nagano,Japan
Topic:Controlling Defects and Morphology of Nanotubes and Graphene during Growth: The Role of Dopants

详情

2014.5

Prof. Gerald. S. Frankel
Fontana Corrosion Center,The Ohio State University,USA
Topic:Mechanism of Hydrogen Evolution on Dissolving Mg Surfaces

详情

2013.10

Prof. Graeme Ackland
Head of Condensed Matter Physics,University of Edinburgh,UK
Topic:Multiscale Modelling of Materials for Fission and Fusion Reactors

详情

2013.9

Dr. Dileep Singh
Argonne National Laboratory,USA.
Topic:Advanced Nanofluids for Energy Efficiency and Storage

详情

2013.9

Prof. Ronald G. Ballinger
Massachusetts Institute of Technology
Topic:The Role of Crack Tip Chemistry and Microstructure on Toughness and Crack Propagation in LWR Environments

详情

2013.6

Prof. Gary Was
University of Michigan,USA
Topic:Toward Radiation Resistant Materials for Conventional and Advanced Reactors

详情

2013.6

Prof. William D. Nix
Department of Materials Science and Engineering
Stanford University,Stanford,USA
Topic:Fracture of Silicon Nanopillars during Electrochemical Lithium Insertion

详情

2013.6

Prof. Antonio H. Castro Neto
Director,Graphene Research Centre
National University of Singapore,Singapore
Professor of Physics,Boston University,USA
Topic:New Directions in Materials Science and Technology: Two-Dimensional Crystals

详情

2013.4

Prof. Dr.-Ing. Gunther Eggeler
Chair for Materials Science,Ruhr-Universit?t Bochum
Topic:Basics of Shape Memory Alloys and the Role of Fatigue in NiTi Shape Memory Technology

详情

2013.4

Prof. Richard A. Portier
Structural metallurgy group,Chimie-Paris Tech,France
Topic:Unexpected Constrained twin hierarchy in rU-based high temperature shape memory alloys martensite

详情

2012.12

Prof. Huajian Gao
School of Engineering,Brown University,USA
Topic:Ductile vs Brittle Fracture Behaviors and Related Deformation Mechanisms in Nanostructured Materials

详情

2012.10

Prof. FangHua Li
Academician of CAS,Institute of Physics Chinese Academy of Science
Topic:Applications of HRTEM based on the image contrast theory and image analysis methods developed in IP,CAS

详情

2012.9

Prof. John R. Scully
Charles Henderson Chaired Professor of Materials Science and Engineering
Co-Director of the Center for Electrochemical Sciences and Engineering
Department of Materials Science and Engineering,University of
VirginiaCharlottesville,VA 22904,U.S.A
Topic:Grand Challenges in Corrosion Science and Engineering and Some New Insights Regarding the Influence of Microstructural Heterogeneity on Corrosion Processes

详情

2012.7

Prof. Philippe Marcus
Laboratory of Physical Chemistry of Surfaces
CNRS – Chimie ParisTech,France
Topic:Micro and Nanoscale Investigation of the Interactions of Metal Surfaces with Gaseous and Liquid Environments:Experimental and Theoretical Approach

详情

2012.7

Prof. Jagdish (Jay) Narayan
Department of Material Science and Engineering
North Carolina State University,USA
Topic:Frontiers in Nanostructured Materials for Next-generation Nanotechnology

详情

2012.6

Prof. Peter Hodgson
Present Director,the Institute for Technology Research and Innovation,
Deakin University,Australia
Topic:The Development and Advanced Characterisation of Next Generation Steels

详情

2012.6

Prof. Isao Tanaka
Department of Materials Science and Engineering
Kyoto University,Japan
Topic:Exploring structures and phase relationships of ceramics at finite temperatures from first principles

详情

2011.12

Prof. Roger C. Reed
Director of Research,Dept of Metallurgy & Materials,
University of Birmingham
Topic:Numerical Modelling for the Design of New Nickel-Based Single Crystal Superalloys

详情

2011.11

Prof. F. Barlat
Graduate Institute of Ferrous Technology (GIFT),
Pohang University of Science and Technology (POSTECH),
Republic of Korea
Topic:Dislocation Density-Based Modeling of the Stress-Strain Behavior under Non-Proportional Loading Condtions

详情

2011.9

Prof. G. Tim. Burstein
Department of Materials Science and Metallurgy,University of Cambridge,UK
Topic:Some unusual characteristics of the passive state of metals,and the processes leading to its breakdown

详情

2011.9

Professor Helen V. Atkinson
Fellow of the Royal Academy of Engineering,President of the UK Engineering Professors’Council,University of Leicester,UK
Topic:Cornflour,Ketchup and Parts for Cars: A Review of Semi-Solid Processing

详情

2011.9

Prof. Rod Ruoff
The University of Texas at Austin,USA
Topic:Graphene-based and Graphene-derived Materials

详情

2011.9

Prof. T. Maki
Kyoto University,Japan
Topic 1: Development of Thermomechanical Processing of Steels 
Topic 2: Advanced High Strength Steels for Automobile Body Structures
Topic 3: Morphology and substructure of lath martensite in ferrous alloys

详情

2011.7

Prof. Dr. S. J. Pennycook
Materials Science and Technology Division
Oak Ridge National Laboratory,Oak Ridge,TN,USA
Topic:Scanning Transmission Electron Microscopy: Past,Present and Future

详情

2011.4

Professor Eduard Arzt
INM – Leibniz Institute for New Materials and Saarland University, Germany
Topic:Strength,adhesion,and meso-textured surfaces: a tour of size effects in materials and structures

详情

2011.3

Professor Dr. Hamish L. Fraser
Dept. of Materials Science & Engineering,The Ohio State University,USA
Topic:Nucleation Studies in Titanium Alloys: The Role of Competing Phase Instabilities

详情

2010.11

Prof. Dr. Yuichi Ikuhara
Institute of Engineering Innovation,the University of Tokyo,Japan
Topic: Atomic Structures and Properties of Ceramic Interfaces Combination of  Cs-corrected STEM and First Principles Calculations

详情

2010.10

Prof. Dr. John T. S. Irvine
School of Chemistry,University of St Andrews,UK
Topic: Fuelling the Future,New Materials for High Temperature Fuel Cells

详情

2010.9

Prof. Tatsuki Ohji
Prime Senior Research Scientist
National Institute of Advanced Industrial Scienceand Technology (AIST),Japan
Topic: Microstructural Design of Porous Ceramics for Unique Mechanical Properties

详情

2010.7

Prof. Jeff Th.M.De Hosson
University of Groningen,The Netherlands
Topic: In situ microscopy of nano-sized materials: challenges and opportunities

详情

2010.5

Prof. Dr. R. Schmid-Fetzer
Clausthal University of Technology,
Clausthal-Zellerfeld,Germany
Topic1: Computational Thermodynamics: Applications in Magnesium Alloy Technology
Topic2: Computational Thermodynamics and the Calphad Method: The Basics

详情

2010.5

Prof. Dr. Lawrence. E. Murr
Materials Research & Technology Institute
The University of Texas at Elpaso,USA
Topic:  Next Generation Biomedical Implants Using Additive Manufacturing of Complex,Cellular and Functional Mesh Arrays

详情

2010.1

Prof. Sybrand van der Zwaag
Delft University of Technology,The Netherlands
Topic:Self healing materials: a new approach to make materials perform better

详情


文档附件

相关信息
联系我们 | 友情链接
地址: 沈阳市沈河区文化路72号 邮编: 110016
运维邮箱: office@imr.ac.cn
中国科学院金属研究所 版权所有 辽ICP备05005387号-1

官方微博

官方微信